DISPLAY COLOR ANALYZER
CA-210
Universal Measuring Probe
Small Universal Measuring Probe
Applications
Rear Projector, PDP, LCD, OLED, FED
Chromaticity Inspection / Adjustment
Quality Control of Chromaticity.
White-Balance Inspection / Adjustment
Gamma Inspection / Adjustment.
Contrast Inspection / Adjustment
FASTER
• The luminance and chromaticity of display can
be measured as fast as 20 times per second
(maximum), enabling faster Gamma
measurement.
ACCURATE
• Accuracy of ±0.002 for White, ±0.004 for R,G,B.
(Chromaticity)
• CIE 1931 Standard Observer XYZ Filter.
• Matrix measurement enables high accuracy for
not just white, but for monochrome colors as well.
LOW LUMINANCE
• Precise measurement can be obtained at low
luminance, enabling lower luminance and high-
accuracy contrast measurement.
Range of luminance for chromaticity measurement
2
: 0.1 to 1000 cd/m
0.3 to 3000 cd/m
2
Select the probe among the following four types.
For LCD flicker measurement, use the LCD Flicker Measuring Probe or Small LCD Flicker Measuring Probe (see other side).
�
Universal Measuring Probe
�
Universal Measuring Probe
�
Small Universal Measuring Probe
�
Small Universal Measuring Probe
Up to five probes can be connected to a single main body. Universal Measuring Probes, Small Universal Measuring
Probes, LCD Flicker Measuring Probes and Small LCD Flicker Measuring Probes can be connected simultaneously to
a single main body.
(To connect multiple probes, the optional four-point extension board (CA-B14) is necessary.)
(Universal Measuring Probe)
(Small Universal Measuring Probe)
(Measurement area φ27 mm / Cable length: 2 m)
(Measurement area φ27 mm / Cable length: 5 m)
(Measurement area φ10 mm / Cable length: 2 m)
(Measurement area φ10 mm / Cable length: 5 m)
EASY TO USE
• The measurement position can be easily
confirmed by pointing function.
• Short measuring distance of 30 mm enables
compact measuring system.
• Precise measurement can be obtained without
the influence of the outside light by short
measuring distance and the rubber hood
(standard accessory).
• Special optical design limits acceptance within
narrow angle of aperture. It eliminates the
influence of viewing. Acceptance angle: ±2.5
(Universal Measuring Probe) , ±5
Universal Measuring Probe)
• 4-digit display for chromaticity enables more
precise data readings.
• Expandable up to 5 measuring probes. (Requires
expansion board CA-B14)
• USB connection provided as standard, so it can
be connected even to computers without serial
ports.
CA-PU12
CA-PU15
CA-PSU12
CA-PSU15
Photo shows Universal Measuring Probe
˚
(Small
˚