Diagnostic Menu; Vehicle Selection - Xtool E2S User Manual

3.5 Diagnostic menu

3.5.1 Vehicle Selection

The scan tool supports the following 3 ways to access the smart diagnostics system.
AUTO SCAN

MANUAL INPUT

SELECT VEHICLE BY AREA

Click the VIN button in the upper left corner and then choose to enter the vehicle diagnosis
through either AUTO SCAN or MANUAL INPUT.
AUTO SCAN: It supports the automatic reading of vehicle VIN code. You also can tap on
the button "AUTO SCAN" on the diagnosis system entrance to use this function. Please
make sure that the car and the device are well connected before using this function.
⚠ If your model is not recognized, please try the following steps:
① UPDATE all software, and check whether the APP is updated in [Settings]
② Please click Diagnosis on the main menu to enter the selection menu, manually select
the engine system to read the ECU information, and confirm whether the VIN can be
read.
③ Contact the XTOOL technical team to provide the VIN code to confirm whether the
model supports automatic identification of VIN.