Memory Channel Operation; Vfo And Memory Mode; Memory Channel Selection - Icom IC-725 Instruction Manual

MEMORY CHANNEL OPERATION 6
The 1C-725 has 26 memory channels. The memory func-
tion is very useful for quickly changing to a desired fre-
quency.
Memory channels 0 ~ 26 can be programmed with one fre-
quency and one mode in each memory channel. Memory
channels 23 — 26 also have the following special memory
functions:
MEMORY CHANNEL
NUMBER CAPABILITY
One frequency and one mode
0 ~ 22 А
іп each memory channel.
Independent transmit and
receive frequencies and mode
on each channel for split
operation.
One frequency and one mode
on each memory channel as
scan edges of Programmed Scan.
6-1 VFO AND MEMORY MODE
SELECTION
1) Push the [MEMO] switch to select MEMORY mode.
2) Push the [VFO] switch to move to VFO mode.
eVFO MODE
"VFO А" or "МЕО В" appear.
e€V3 MEMORY MODE
"MEMO" appears.
6-2 MEMORY CHANNEL SELECTION
1) Push the [MEMO] switch to select MEMORY mode.
2) Push the [UP] or [DOWN] switch on the front panel,
or the [UP] or [DN] switch on the microphone to select
the desired memory channel.
When the [LOCK] switch is pushed IN, only
memory channels. with the same operating
mode as displayed are selected when the [UP]
or [DOWN] switch is pushed.
6-3 MEMORY WRITING
1) Select either VFO or MEMORY mode.
2) Push the [UP] or [DOWN] switch to select the desired
memory channel.
3) Set the desired frequency and mode you want to
memorize.
4) Push the [MW] switch to memorize the information.
6-4 FREQUENCY TRANSFERRING
[M» VFO]
The selected memory contents in a memory channel can be
transferred to a VFO mode. This switch operates dif-
ferently depending on which mode the IC-725 is in.
(1) IN VFO MODE
The frequency and mode stored in the displayed memory
channel are transferred to a selected VFO mode.
1) Push the [UP] or [DOWN] switch to select the desired
memory channel you want to read.
2) Push-the [FUNC] switch then the [MW] switch.
eMemory contents in the displayed memory channel
number appear on the FUNCTION DISPLAY.
Operating frequency : 21.26000 MHz/USB
Contents of MEMO 20 : 14.10000 MHz/CW
(2) IN MEMORY MODE
The displayed frequency and mode are transferred to the
VFO used immediately prior to changing to MEMORY
mode. |
1) Push the [UP] ог [DOWN] switch to select the desired
memory channel you want to read.
2) Push the [FUNC] switch then the [MW] switch.
e The displayed memory contents are transferred.
3) Push the [VFO] switch.
e The selected memory contents are displayed.
Operating memory channel MEMO 20
14.10000 MHz/CW
Push [FUNC], then [MW]. Push [VFO].