Simplicity CFC Series Operator's Manual page 56

Specifications
CONTROLS:
Steering
Ground Speed/
Direction
Brakeshaft
Location
Mower Drive
Engagement
Steering Wheel, 40° Full Right Turn
40° Full Left Turn, Forward Seeking
4 Position Tilt or Dual Lever Steering
Foot Pedal Speed and Direction
Control, infinitely Variable, Adjustable,
Right Side of Steering Column or
Dual Lever Individual Wheel Speed Control
Dynamic Braking with Hydrostatics, Hand
Operated Parking Brake, Band and
Drum for Each Wheel
Ignition Key, Throttle, Choke at Operator
Control Panel
Type: Manual, Lever
Location: Right Side of Engine
Compartment
Interlock: Operator Present System
DIMENSIONS:
Overall Length
Overall Width
Height
Weight (approx.)
Ground Clearance
Overall Length
with Mower
72 in. (183 cm)
49 In. (124 cm)
41 In. (104 cm)
610 Lbs. - 16 HP Lever
660 Lbs- - 18 & 20 HP Lever
640 Lbs. - 16 HP Steer
690 Lbs. - 18 & 20 HP Steer
4.5 In.
46" Mower - 98 In. (249 cm)
54" Mower •> 92 In. (234 cm)
60" Mower - 94 In. (239 cm)
66" Mower - 96 In. (244 cm)
MOWER:
Effective Cutting
46" Model -46 In. (117 cm)
Width
54" Model - 54 In, (137 cm)
Overall Width
60" Mode! - 60 In. (152 cm)
66" Model - 66 In. (168 cm)
46" Model-55 In. (140 cm)
with Deflector
54" Model-63 In. (160 cm)
No. of Blades
60" Model - 69 In. (175 cm)
66" Model - 75 In. (191 cm)
46" - 2, 54" - 3, 60" - 3, 66" - 3
Blade Length
46" Model - 1 - 26", 1 - 20-1/8"
AH
Mowers
Gauge Wheels
54" Model -18-3/4"
60" Model - 20-11/16"
66" Model - 1 - 26", 2 - 20-11/16'
4.10/3.50-4
Tire Pressure 30 psi
Rollers
4" Diameter x 2"
Construction
Welded Steel - 7 ga. Skirt,
Spindles
11 ga. Top with Reinforcing
Lip-Front and Reinforcing Rod -
1" Welded
Spindle Housings
Welded Steel
Spindle Bearings
2-1" Sealed Ball Bearings
Spindle Support 9/16" Steel
Drive
V-Belts
Cutting Heights
1"-4"
Discharge
Right Side
Hook-Up to Tractor 2 Pins - 7-1/4" Forward of Front Axle
Bearings Greaseable Bearings on Spindles, Wheels
and Caster Forks
54
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE.