Simplicity CFC Series Operator's Manual page 29

Troubleshooting
3. Attach one end on one jumper cable to the positive
terminal of the booster battery (identified by a red color,
or "P" on the battery case, post or clamp) and the
other end of same cable to positive terminal of
discharged battery.
4. Attach one end of the remaining cable to the negative
terminal (black color, or "N") of the discharged
battery, and the other end to a bare metal surface on the
frame of your rider AWAY FROM the battery
compartment (do not connect directly to negative post
of booster battery). Take care that clamps from one
cable do not inadvertently touch the clamps on the other
cable. Do not lean over the battery when making the
connection.
5. The rider with discharged battery should now start.
Reverse the jump starting procedure exactly to remove the
jumper cables. Then reinstall the vent caps and throw the
cloths away as they may have corrosive acid on them.
*1582
THIS HOOK-UP FOR NEGATIVE GROUND VEHICLES -r
To To
Figure 11. Jump Starting
27