infobit iTrans DX-22-US User Manual page 4

4. Specifications
Technical
Network
Bandwidth
Control Method Dante
Audio Latency
Audio Formats
Audio
Parameters
Transmission
Distance
ESD Protection
100M
Controller
®
Configurable Dante
(Supports 1, 2 or 5ms configurable using Dante
Controller)
DANTE [Digital audio in/out, PCM 2CH 44.1K-96KHz
16/24Bit]
LINE In [Analog audio, Balanced/unbalanced connection,
Max input level 24dBu]
MIC In [Analog audio, Balanced/unbalanced connection,
Max input level 50mVRMS]
LINE Out [Analog audio, Balanced/unbalanced
connection, Max output level 18dBu]
Output Impedance 300 Ohm
Output Level
(Maximum)
Frequency
Response
Dynamic Range
Audio S/N Ratio
Audio THD+N
328ft/100m (CAT6/6A/7)
IEC 61000-4-2: ±8kV (Air-gap discharge) &
±4kV (Contact discharge)
device latency
®
18dBu (Maximum)
20Hz to 20kHz (-/+0.5dB)
> 90dB@0dBu, 1kHzA-weighted
> 90dB@0dBu, 1kHzA-weighted
< 0.015% at +4dBu, 1KHz
2 / 6
®