Subscribe to Our Youtube Channel
Related Manuals for infobit iTrans DX-22-US
Summary of Contents for infobit iTrans DX-22-US
- Page 1 DX-22-US 2x Input & 2x Output Analogue XLR to Dante Converter ® VER 1.0 info@infobitav.com www.infobitav.com...
- Page 2 Thank you for purchasing this product For optimum performance and safety, please read these instructions carefully before connecting, operating or adjusting this product. Please keep this manual for future reference. Surge protection device recommended This product contains sensitive electrical components that may be damaged by electrical spikes, surges, electric shock, lighting strikes, etc.
- Page 3 1. Introduction Converter is an audio This 2x Input & 2x Output Analogue XLR to Dante ® transmitter based on the Dante Ultimo 2x2 solution. It is designed as a ® standard 2-GANG US wall plate to convert and bridge traditional audio source/sink devices to Dante digital network.
- Page 4 4. Specifications Technical Network 100M Bandwidth Control Method Dante Controller ® Configurable Dante device latency ® (Supports 1, 2 or 5ms configurable using Dante Audio Latency ® Controller) DANTE [Digital audio in/out, PCM 2CH 44.1K-96KHz 16/24Bit] LINE In [Analog audio, Balanced/unbalanced connection, Max input level 24dBu] Audio Formats MIC In [Analog audio, Balanced/unbalanced connection,...
- Page 5 Connection 1x Power LED [Green Color] 1x ID LED [Green Color] 2x MIC Phantom Power 48V LED [Green Color] 2x MIC Phantom Power 48V button with backlit LED [Green Color] 2x Audio In [3-pin XLR, Female] Front Panel [LINE audio, Balanced/unbalanced connection, Max input level 24dBu] [MIC audio, Balanced/unbalanced connection, Max input level 50mVRMS, 48V phantom power]...
- Page 6 5. Operation Controls and Functions Front Panel Name Function Description 48V phantom power LEDs. When the 48V phantom power of the MIC audio input channel 1/2 is turned 48V LED 1/2 on, the corresponding 48V LED is on. Balanced/unbalanced XLR analog audio input port Audio IN 1/2 1/2, connected to MIC/LINE analog audio source port...
- Page 7 Name Function Description ID LED Illuminates to assist in identification of the device (green) via Dante Controller. The 5-level sensitivity adjustment knob for analog Audio IN 1/2 audio input channel 1/2. The knob arrows indicate: knob 1. +24dBu, 2. + 4dBu, 3. 0dBu, 4. -10dBv, 5. -28dBv. ▪...
- Page 8 6. Application Example 2x Input & 2x Output Analogue XLR to Dante Converter ® Mixing Console Audio Processor Network Switch (PoE) Dante Amplifier ® Note: Please pay attention to the XLR connector pinouts when connecting XLR audio input/output devices. Pin 1: Ground/Shield Pin 2: Positive/Hot Pin 3: Negative/Cold Male...
Need help?
Do you have a question about the iTrans DX-22-US and is the answer not in the manual?
Questions and answers