Related Manuals for infobit iTrans DX-22-EUK
Summary of Contents for infobit iTrans DX-22-EUK
- Page 1 DX-22-EUK 2x Input & 2x Output Analogue XLR to Dante Converter ® VER 1.0 info@infobitav.com www.infobitav.com...
-
Page 2: Table Of Contents
Thank you for purchasing this product For optimum performance and safety, please read these instructions carefully before connecting, operating or adjusting this product. Please keep this manual for future reference. Surge protection device recommended This product contains sensitive electrical components that may be damaged by electrical spikes, surges, electric shock, lighting strikes, etc. -
Page 3: Introduction
1. Introduction This 2x Input & 2x Output Analogue XLR to Dante Converter is an audio ® transmitter based on the Dante Ultimo 2x2 solution. It is designed as a ® standard 2-GANG EU/UK wall plate to convert and bridge traditional audio source/sink devices to Dante digital network. -
Page 4: Specifications
4. Specifications Technical Network 100M Bandwidth Control Method Dante Controller ® Configurable Dante device latency ® Audio Latency (Supports 1, 2 or 5ms configurable using Dante ® Controller) DANTE [Digital audio in/out, PCM 2CH 44.1K-96KHz 16/24Bit] LINE In [analogue audio, Balanced/unbalanced connection, Max input level 24dBu] Audio Formats MIC In [analogue audio, Balanced/unbalanced... - Page 5 Connection 1x Power LED [Green Color] 1x ID LED [Green Color] 2x MIC Phantom Power 48V button with backlit LED [Green Color] 2x Audio In [3-pin XLR, Female] Front Panel [LINE audio, Balanced/unbalanced connection, Max input level 24dBu] [MIC audio, Balanced/unbalanced connection, Max input level 50mVRMS, 48V phantom power] 2x Audio Out [3-pin XLR, Male, analogue audio, Balanced/ unbalanced connection, Max output level 18dBu]...
-
Page 6: Operation Controls And Functions
5. Operation Controls and Functions Front Panel Name Function Description Press the button to turn on the 48V phantom power IN 1/2 of the MIC audio input channel 1/2, then the 48V button & corresponding backlit LED backlit LED ID LED Illuminates to assist in identification of the device via (green) Dante Controller. - Page 7 Name Function Description The 5-level sensitivity adjustment knob for analogue Audio IN 1/2 audio input channel 1/2. The knob arrows indicate: knob 1. +24dBu, 2. + 4dBu, 3. 0dBu, 4. -10dBv, 5. -28dBv. The 5-level gain adjustment knob for analogue audio Audio OUT output channel 1/2.
-
Page 8: Application Example
6. Application Example 2x Input & 2x Output Analogue XLR to Dante Converter ® Mixing Console Audio Processor Network Switch (PoE) Dante Amplifier ® Note: Please pay attention to the XLR connector pinouts when connecting XLR audio input/output devices. Pin 1: Ground/Shield Pin 2: Positive/Hot Pin 3: Negative/Cold Male...
Need help?
Do you have a question about the iTrans DX-22-EUK and is the answer not in the manual?
Questions and answers