Battery Installation - Audiovox LCM1041TV Owner's Manual

FRONT PANEL FEATURES – See Figure 1
1. Sensor Eye – Allows the remote control to operate the LCM1041TV's OSD system (On Screen
Display), volume to wired headphone jacks (and optional external speakers), and for control of Video
Cassette Player and other accessories.
2. Power Button – (Bright red when system is ON, dim when system is OFF).
3. Channel Up/Down – Changes the TV channel.
4. Auto Program – Press this button, the TV will automatically scan and memorize the broadcasting
signal channels.
5. Screen Release – Slides in the direction of the arrow to release the drop down screen.
6. TV/AV – Used to select one of the three A/V sources.
7. Picture Tuning Up/Down – Adjust picture control level Up or Down, if required.
8. Picture Select – To select contrast, Brightness, Color and Tint for desired level adjustment.

BATTERY INSTALLATION

Before attempting to operate your Remote Control, install the batteries as described below.
1) Turn the remote control face down. Press down on the ridged area of the battery cover, and slide it
off.
2) Install two "AAA" batteries as shown. Make sure that proper polarity (+ or -) is observed.
3) Slide the cover back until it clicks into position.
The remote control will operate the LCM1041TV, Flexvision Televisions and Video Cassette Players. It
is not a universal remote control and will not control equipment from other manufacturers.