Audiovox LCM1041TV Owner's Manual page 10

active channels when the CHANNEL UP/DOWN
buttons are used on the monitor or the remote
control. (B) To tune to weak or marginal channels
with the CHANNEL UP/DOWN buttons, press the
SKIP/SEARCH button on the Remote Control Unit
until "SKIP MODE OFF" is displayed on the bottom
of the screen. Tune to the desired channel using
the CHANNEL UP/DOWN buttons or go directly to
the channel by using the 0-9 buttons on the Remote
Control.
3. To ERASE a channel, press the ERASE/WRITE
button on the Remote Control Unit until "MANUAL
MEMORY XX ERASE" is displayed on screen. To
STORE a channel, press the button until the
MANUAL MEMORY XX ADD is displayed on
screen.
Note: Please refer to page 2 for more information on TV reception.
TURNING THE LCM1041TV ON OR OFF
1. Sliding the screen release lock forward will
unlock the LCD screen and it will drop down
slightly. (Pivot the screen downward until a
comfortable angle is reached). After the unit has
been turned on and is displaying a picture,
adjustment to the viewing angle can be made by
pivoting the screen to optimize the picture quality.
The friction hinges will hold the screen in
position while the system is in use.
2. Pressing the power button on the pod or remote
will alternately turn the system on or off. When in