Advertisement
Quick Links
with Graphic Slots & Dual VESA Plates (Black/White)
CONTENTS:
**DISCLAIMER - ITEMS H & I, WILL NOT
BE USED IN THIS PACKAGE AND ONLY
WITH OTHER COMPATIBLE VESA
ITEMS OR CTA SPECIFIC
ENCLOSURES, ITEMS AND KITS
2. SETTING UP GRAPHIC CARD SLOT
2A. SLIDE OUT THE (2) GRAPHIC CARD PANELS IN THE FRONT AND BACK OF THE BODY (J). IF THERE IS A STICKER FILM, REMOVE
THAT FIRST. IF YOU HAVE PRINTED OUT A STICKER GRAPHIC, PLACE IT ONTO THE PANEL. IF YOU ARE USING A COMPLETE NEW
PANEL, YOU CAN REPLACE THE INITIAL PANELS THAT CAME WITH THE FLOOR STAND. PLACE ONE PANEL BACK FIRST, THEN THE
OTHER.
Premium Floor Stand Kiosk
ADD-PARAFSV2 / ADD-PARAFWV2
INSTRUCTION - MANUAL
1. INSTALLING BASE:
A
1A. ALIGN BASE PLATE (A) WITH THE BODY (J) AND
ROTATE IN SCREW (F) FROM THE BOTTOM USING
THE PROVIDED ALLEN KEY TOOL (C).
888-733-4448
J
F
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for CTA ADD-PARAFSV2
Summary of Contents for CTA ADD-PARAFSV2
- Page 1 Premium Floor Stand Kiosk with Graphic Slots & Dual VESA Plates (Black/White) ADD-PARAFSV2 / ADD-PARAFWV2 INSTRUCTION - MANUAL 1. INSTALLING BASE: CONTENTS: **DISCLAIMER - ITEMS H & I, WILL NOT BE USED IN THIS PACKAGE AND ONLY WITH OTHER COMPATIBLE VESA 1A.
- Page 2 3. SETTING UP CABLE ROUTING 3A. WITH ONLY (1) PANEL BACK IN, SLIDE IN THE POWER CORDS AND ANY OTHER CORDS THAT WOULD NEED TO BE CONNECTED TO THE TABLET THROUGH THE BODY AS SHOWN. THERE WILL BE GAPS AT THE TOP AND BOTTOM FOR THEM TO ROUTE OUT TO THE POWER SOURCE AND TO THE DEVICE.
Need help?
Do you have a question about the ADD-PARAFSV2 and is the answer not in the manual?
Questions and answers