Advertisement
Quick Links
CTA Digital Floor Stand Component
ADD-PARAFS / ADD-PARAFSW / ADD-PARAFSS
x1
x1
1. Mounting Base to Floor Stand Body
Align the holes of the floor stand body
to the base plates. Make sure the
orientation of the base plate and body
is as shown in the example. Screw in
tightly with provided tool.
For Kitting
INSTRUCTION - MANUAL
CONTENTS:
x1
x1
x1
x4
INSTRUCTIONS:
888-733-4448
x4
x4
x4
Advertisement
Related Manuals for CTA ADD-PARAFS
Summary of Contents for CTA ADD-PARAFS
- Page 1 CTA Digital Floor Stand Component For Kitting ADD-PARAFS / ADD-PARAFSW / ADD-PARAFSS INSTRUCTION - MANUAL CONTENTS: INSTRUCTIONS: 1. Mounting Base to Floor Stand Body Align the holes of the floor stand body to the base plates. Make sure the orientation of the base plate and body is as shown in the example.
- Page 2 2. Setting up Cable Routing Have the cable at the top hanging out of the VESA mount and ready to be plugged into whatever device and VESA compatible item that mounts to the floor stand. Use the provided weighted pendant to route a cable through the stand. Start at the top through the center of the VESA as shown and drop it down through the body and out the bottom as shown.
Need help?
Do you have a question about the ADD-PARAFS and is the answer not in the manual?
Questions and answers