Advertisement
Extended Pole C-Clamp VESA Mount
CONTENTS:
A
x1
INSTALLATION:
1. Connecting VESA plate to the gooseneck :
E
B
1A. Place a plastic washer (E) in between
the gooseneck adapter (B) and gooseneck.
Align and assemble.
2. Connecting VESA gooseneck with pole :
B
H
2A. Screw on the gooseneck (B) onto the base body
pole (H) by turning clockwise. Shown above.
with Flexible Gooseneck
ADD-CPOLEGN
INSTRUCTION - MANUAL
D
C
x1
Nut
B
D
A
E
1B. Place a plastic washer (E) followed by
a metal washer (D) over the gooseneck end
adapter, and rotate in screw nut (C) with
fingers initially.
Y Screw
Metal Connection
E
x1
x2
x1
C
1C. Use the socket wrench (F) to tighten it
securely.
B
2B. Rotate Y-Screw to tighten gooseneck to pole.
Shown above.
888-733-4448
F
x1
H
x1
F
Note: Make sure Y-Screw is
loosened before rotating on
gooseneck.
Y Screw
G
x1
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for CTA ADD-CPOLEGN
Summary of Contents for CTA ADD-CPOLEGN
- Page 1 Extended Pole C-Clamp VESA Mount with Flexible Gooseneck ADD-CPOLEGN INSTRUCTION - MANUAL CONTENTS: INSTALLATION: 1. Connecting VESA plate to the gooseneck : 1A. Place a plastic washer (E) in between 1B. Place a plastic washer (E) followed by 1C. Use the socket wrench (F) to tighten it the gooseneck adapter (B) and gooseneck.
- Page 2 3. Installing C-Clamp to Pole : 3A. Align C-Clamp hole (G) at the connection piece of pole (H) and turn it in until secured. As shown above. 4. Adjusting C-Clamp : 4A. Rotate knob counter-clockwise to loosen the clamp for a 4B.
Need help?
Do you have a question about the ADD-CPOLEGN and is the answer not in the manual?
Questions and answers