Advertisement
Table of Contents
- 1 1. Attaching Foam Pad to Tablet Holder
- 2 2. Installing the Wheels
- 3 3. Base Assembly and Connecting the Metal Cover
- 4 4. Connecting the Tablet Gooseneck Holder & Battery Case
- 5 5. Installing Your Device and Adjusting the Floor Stand
- 6 Security Acrylic Sanitizing Station
- 7 Automatic Hand Sanitizer Dispenser
- 8 Universal Acrylic Soap Dispenser Holder
- Download this manual
ADD-POLE
2. Installing the Wheels
Place a spring washer over the screw
bolt on the wheel.
2. Installing the Wheels
Place a spring washer over the screw
bolt on the wheel.
Package Contents:
Compact Security
Gooseneck Floor Stand
& Connecting Pole Add-on
INSTRUCTION MANUAL
PAD-SCGS & ADD-POLE
Instructions:
1.Attaching Foam Pad to Tablet Holder
Package Contents:
5mm
Foam
Pad
Select the appropriate foam pad according
to the thickness of your tablet (or tablet in its
case), then press adhesive side into center
of the tablet holder.
Section 1
1.Insert key and unlock the
Instructions:
holder,TAKE OUT THE KEY
then slide the arm to open
1.Attaching Foam Pad to Tablet Holder
to a width according to your
need.
2. Insert key and lock the
holder,TAKE OUT THE KEY
then install your device in
1mm Foam Pad
and slide the arm closed
to hold tightly.
5mm
Foam
Pad
Select the appropriate foam pad according
to the thickness of your tablet (or tablet in its
case), then press adhesive side into center
of the tablet holder.
Section 1
1. Insert key and set position
to unlock. Remove key,
then slide holder open.
Place the screw bolt from each wheel through the metal base, then place a nut cov
2. Load tablet corner first
over the top of each. Screw down clockwise by hand, then use wrench to tighten
into one end. Insert key
and set to lock, then slide
further.
holder shut until secure.
Remove key.
Place the screw bolt from each wheel through the metal base, then place a nut cover
over the top of each. Screw down clockwise by hand, then use wrench to tighten
further.
1mm Foam Pad
10mm
Foam
Pad
UNLOCK
UNLOCK
Use this table to determine the appropriate
foam pad to use with your tablet.
Note: sizes refer to total tablet size with or
without a case.
UNLOCK
Foam Pad
Thickness
10mm
Foam
Pad
Screw Nut Cover
Spring
Washer
Metal
Base
UNLOCK
UNLOCK
Wheel
UNLOCK
Screw Nut Cover
Spring
Washer
Metal
Base
Wheel
Use this table to determine the appropriate
foam pad to use with your tablet.
Note: sizes refer to total tablet size with or
without a case.
Foam Pad
Thickness:
Thickness
1mm
0.67-1.06in
5mm
0.51-0.91in
10mm
0.31-0.71in
UNLOCK
Tablet
Thickness:
17-27m
1mm
0.67-1.06in
/
5mm
0.51-0.91in
/
13-23m
10mm
0.31-0.71in
/
8-18mm
UNLOCK
UNLOCK
Tablet
17-27m
/
m
/
13-23m
m
/
8-18mm
UNLOCK
m
m
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for CTA PAD-SCGS
Summary of Contents for CTA PAD-SCGS
- Page 1 Package Contents: Compact Security Gooseneck Floor Stand & Connecting Pole Add-on INSTRUCTION MANUAL PAD-SCGS & ADD-POLE Instructions: 1.Attaching Foam Pad to Tablet Holder Package Contents: Use this table to determine the appropriate foam pad to use with your tablet. Note: sizes refer to total tablet size with or without a case.
- Page 2 3. Base Assembly and Connecting the Metal Cover: METAL CONNECTION Pole Assembly and Pole Nut 1) Place the metal base pieces with the higher Cross Base Sections (2) CONNECTION SCREW BOLT, piece on top of the cross base. Align the holes WASHERS AND NUT Allen Key at the bottom of the pole with the holes on the...
- Page 4 Automatic Hand Sanitizer Dispenser...
- Page 6 Universal Acrylic Soap Dispenser Holder...
Need help?
Do you have a question about the PAD-SCGS and is the answer not in the manual?
Questions and answers