Power Management - NEC VERSA SX User Manual

A cold boot is a system start with power off. A cold boot also resets the
hardware. It checks the hardware and reloads the operating system.
Press the system unit power switch to perform a cold boot. If power is
on, turn the power off using the system unit power switch, wait at least
five seconds, and then turn the power on.
Note:
restart your notebook computer.

Power Management

features enabled?
features enabled. If you do not use the keyboard, mouse, or drives for the
preset length of inactive time, your screen goes blank and your system
goes into a power saving mode of operation. This is known as Standby
mode.
When your screen goes blank, before the system goes into Suspend
mode, just press the space bar or move your mouse to reactivate your
system.
When possible, use a warm boot to
Does my system come with power management
Yes, your system comes with power management
Frequently Asked Questions C-13