Using Hdprepez In Windows Nt; Nec Help Center - NEC VERSA SX User Manual

6. Power off your system and then power on. A file, large enough to
accommodate your system's memory is created on the hard disk
drive.

Using HDPREPEZ in Windows NT

In Windows NT, run the HDPREPEZ utility
Follow these steps to run the HDPREPEZ utility.
1. Go to Start, Programs, AMI Save to File.
2. Select "Create STF File."
A DOS box displays and prompts you to "Proceed Y/N?"
3. Enter
Y
The STF file is created. When complete, a warning message
indicates that the system will reboot.

NEC Help Center

The NEC Help Center is a fully navigational, HTML-based online
document. The Help Center includes multimedia elements, a full search
capability, index, and a glossary function.
The NEC Help Center includes the following sections.
T
The System Tour provides a multimedia version of system features
and functions as described in Chapter 1 of the printed user's guide.
T
System Information provides an online version of Chapters 2-7 and
appendices A and B of the printed user's guide and describes:
Getting Started
Using the Software
Using the Hardware
Using External Devices
Using Multimedia
Solving System Problems
3-24 Using the Software
to create the STF file.