NEC VERSA SX User Manual page 56

Hide thumbs Also See for VERSA SX:
Table of Contents

Advertisement

T
Time — Set the time, enter the current hour, minute, and second in
hr/min/sec, 24-hour format.
To set the time use the Tab or arrow keys to move from field to field.
Use the
T
Diskette Drives — Lets you designate the drive type for your diskette
drives.
T
Internal Hard Disk Drive — Allows you to enable or disable the
internal hard drive(s) in your system.
T
Docking Station Drives — Enable and disable the drives installed in a
docking station. (These options are only available when the NEC
Versa is docked.)
Advanced CMOS Setup
Advanced CMOS settings let you define the following functions.
T
LCD Panel View Expansion — Specifies whether the panel view is
reduced/off or expanded/on.
T
PS/2 Port Hot Swap — Specifies whether or not you can swap a PS/2
device during system operation.
T
Internal Mouse — Specifies whether or not you can use both the
internal and the external mouse.
System Security Setup
T
Change Supervisor Password — Allows you to establish password
protection for entering the BIOS setup utility, booting the system, and
resuming from suspend.
T
Change User Password — Allows you establish a user password once
a Supervisor password is set.
T
Boot Password Required — Indicates whether or not a password is
required during system boot.
T
Resume Password required — Indicates whether or not a password is
required during system resume.
3-12 Using the Software
or
key to change the numbers within each field.
PgUp
PgDn

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents