NEC VERSA SX User Manual page 58

–
–
–
–
–
T
LCD Suspend/Resume — Allows you to suspend/resume when the
LCD panel is opened and closed.
T
Suspend Option — Allows you to specify either Suspend or Save to
File (STF) as the default power management mode. In Suspend, after
a specified amount of inactivity, your NEC Versa shuts down all
devices as you specified in Power Management Setup or applies
default timeouts. All your data is automatically recovered from where
you left off when you Resume.
T
Automatic STF — After 30 minutes in Suspend mode the current file
is automatically saved to a special file on the hard disk and the system
shuts down. To resume, you must press the power button. The system
reads the saved file and sets up your system accordingly.
If Auto Save to File is set to Off and HDPREPEZ is present, pressing
the
Fn-Power/Sleep
File mode.
T
Panel Backlight — Lets you select the LCD screen backlight
intensity.
T
Suspend Warning Tone — Specifies whether the system warning tone
sounds when Suspend mode starts. It is best to keep this option
enabled.
3-14 Using the Software
Video Timeout — Allows you to select the amount of time
before your video shuts down.
Peripheral Timeout — Lets you choose the amount of time
before your peripherals are controlled by power management.
Audio Device Timeout — Selects the amount of time before
your audio device shuts down.
Standby Timeout — Allows you to select the system standby
timeout period.
Auto Suspend Timeout — Defines how much time elapses
before the system automatically enters Suspend Mode.
key combination puts the system into Save to