NEC VERSA SX User Manual page 59

T
Modem Ring Resume — Lets you choose whether the system
resumes automatically when an external modem receives a ring
signal.
T
Wake Up from Suspend Alarm/Resume Alarm Time — Lets you set a
resume time from Suspend mode.
Boot Device Setup
Boot Device Setup allows you to define the following functions.
T
Quick Boot — Specifies whether or not the system performs all tests
during system boot.
T
Docking Station Video — Selects whether or not the Docking Station
video card is enabled at system boot.
T
Bootup NumLock — Specifies whether NumLock is On or Off at
system startup.
T
Boot Devices — Specifies the sequence of boot devices and whether
or not the system attempts to boot from a device other than those
specified.
T
Other Boot Devices — Allows you to specify IDE devices as
bootable devices.
Peripherals Setup
The Peripherals Setup menu displays the connection locations between
the system and the Input/Output (I/O) ports. This menu also lets you
specify different port assignments as needed.
Note:
Setup, you cannot enable or assign it using the
Windows 95 device manager. The device will not be
listed in the Windows 95 device list. To control the
device using the Windows 95 device manager,
select any setting other than "Disable" in Peripheral
Setup.
If you disable a device in Peripheral
Using the Software 3-15