Table of Contents
Advertisement
Graphics Aperture Size — Selects the graphics aperture size used by the AGP video
!
device, a memory window that optimizes access to accelerated graphics memory.
System Security Setup
Use the System Security Setup to establish system passwords.
Parameter
Assign Supervisor
Password
Assign User Password
Boot Password Required
Resume Password
Required
Assign HDD Password
Internal HDD Password
VersaBay HDD Password
DS Internal HDD
Password
DS VersaBay HDD
Password
1
These setup items are only visible when system is docked
Assign Supervisor Password — Establishes password protection for entering the
!
BIOS Setup Utility, booting the system, and resuming from Standby. (Resume from
Standby, not applicable in Windows 98 with ACPI.)
Assign User Password — Establishes a user password once a supervisor password
!
is set.
Boot Password Required — Indicates whether or not a password is required during
!
system boot.
Resume Password required — Indicates whether or not a password is required
!
during system resume. Boot Password must be defined to activate this parameter.
Assign HDD Password — Allows you to assign a password to allow or restrict
!
access to the hard disk drive contents.
Internal HDD Password — Enables or disables the HDD password.
!
3-8 Using the BIOS Setup Utility
System Security Setup
Default Setting
Press Enter
Press Enter
No
No
Press Enter
Disabled
Disabled
Disabled
1
Disabled
1
Alternate Setting(s)
Yes
Yes
Enabled
Enabled
Enabled
Enabled
.
Advertisement
Table of Contents
