Table of Contents
Advertisement
If you are replacing a SO-DIMM and need to remove one that is already installed,
do so as follows:
Press the locking tabs away from the sides of the SO-DIMM and hold while
!
gently lifting on the edge of the SO-DIMM.
When the edge of the SO-DIMM pops up and is at approximately a 60 degree
!
angle, pull the SO-DIMM from the socket.
Removing an installed SO-DIMM
Replace the memory module bay cover and screw.
6.
Turn over the system and power on.
7.
Using the System Drives and Bays 5-21
Advertisement
Table of Contents
