Table of Contents
Advertisement
Full Disk Drive Restore
If your preinstalled software becomes unusable and you cannot boot from the hard disk,
use the Product Recovery Utility to restore your system to its initial shipping
configuration. The Full Disk Drive restore option erases the hard disk completely
before reinstalling the files.
drive and replaces them with the original factory installed files.
Only use the Full Disk Drive restore option if the preinstalled software is unusable.
Use the Product Recovery Utility to perform a Full Disk Drive restore as follows:
Check the Product Recovery CD title and make sure that it is the correct CD for
1.
your NEC Versa computer and operating system.
Put the CD into the CD-ROM drive tray, close the drive door, and power on your
2.
system.
Read the License Agreement screen that appears. Use the VersaGlide touchpad to
3.
position the cursor on the Accept button. Left click to accept the agreement.
You have the option of accepting or declining the agreement. If you decline the
agreement, the recovery utility exits.
In the NEC Product Recovery Utility screen, use the VersaGlide touchpad to
4.
choose Full Disk Drive to restore your hard disk drive to its original factory
installed state.
applications installed on your system.
5.
Read the Warning screen.
A warning displays indicating that your hard disk is about to be erased.
Select Continue to proceed to perform a Full Disk Drive restore.
6.
If you select Back, the recovery utility returns to the prior screen which has an exit
option.
If you select Continue, a screen with progress bars displays and lets you know the
progress of the recovery.
The Full Disk Drive restore option deletes all files on the hard
Choose your restore option carefully to prevent losing data and
Using the Operating System and Utilities 4-13
Advertisement
Table of Contents
