Table of Contents
Advertisement
Power button and holding it in place for 4 or fewer seconds. This places the system in a
deeper state of "sleep" and requires that you press the Power button again to bring it
back to Active mode. (The System Switch BIOS parameter must be set to "Sleep.")
Putting your system into Suspend initiates the Suspend power-saving mode and is a
convenient way of conserving energy when you are going to be away from your system
for short period of time.
Shut Down, Standby. This places the system in a deeper state of "sleep" and requires
that you press the Power button to resume operation.
Putting your system into Standby initiates the Standby power-saving mode and is a
convenient way of conserving energy when you are going to be away from your system
for a short period of time.
by putting the system in a maximum power shutdown. When the system goes into STF
mode, it saves data and system status and then shuts off power to all components. STF
mode lets you save power without first saving your work. Resuming from STF mode
requires less time than performing a cold boot.
C-8 Frequently Asked Questions
What is the purpose of Suspend to RAM? (Windows 95/NT)
You can initiate full Suspend-to-RAM in Windows 95/NT by pressing the
What is the purpose of Suspend to RAM? (Standby in Windows 98)
You can initiate full Suspend-to-RAM in Windows 98 by accessing Start,
What is the function of Suspend-to-File? (Windows 95/NT)
In Windows 95/NT, Suspend-to-File provides the greatest power savings
Advertisement
Table of Contents
