System Security Setup - NEC Versa Sxi Series Service And Reference Manual

PS/2 Port Warm Swap — Specifies whether or not you can swap a PS/2 device during
!
system suspension.
Internal Mouse — Specifies whether or not you can use both the internal and the external
!
mouse.
Graphics Aperture Size — Selects the graphics aperture size used by the AGP video device,
!
a memory window that optimizes access to accelerated graphics memory.

System Security Setup

Use the System Security Setup to establish system passwords.
Parameter
Assign Supervisor
Password
Assign User Password
Boot Password Required
Resume Password
Required
Assign HDD Password
Internal HDD Password
VersaBay HDD Password
Assign Supervisor Password — Establishes password protection for entering the BIOS
!
Setup utility, booting the system, and resuming from Standby. (Resume from Standby, not
applicable in Windows 98/2000 with ACPI.)
Assign User Password — Establishes a user password once a supervisor password is set.
!
Boot Password Required — Indicates whether or not a password is required during system
!
boot.
Resume Password Required — Indicates whether or not a password is required during
!
system resume. Boot Password must be defined to activate this parameter.
Assign HDD Password — Allows you to assign a password to allow or restrict access to the
!
hard disk drive contents.
Internal HDD Password — Enables or disables the HDD password.
!
VersaBay HDD password — Enables or disables the VersaBay III password.
!
2-12 System Configuration and Setup
System Security Setup
Default Setting
Press Enter
Press Enter
No (if no Supervisor Password
has been set yet)
Yes (if a Supervisor Password
has already been set)
No (if no Supervisor Password
has been set yet)
Yes (if a Supervisor Password
has already been set)
Press Enter
Disabled
Disabled
Alternate
Setting(s)
Yes
No
Yes
No
Enabled
Enabled