System Security Setup - NEC VERSA VX Manual

System Security Setup

Use the System Security Setup to establish system passwords.
Parameter
Assign Supervisor
Password
Assign User Password
Boot Password Required
Resume Password
Required
Assign HDD Password
Internal HDD password
1
Option is not available until supervisor password is set up
2
Only active when Boot Password is set to Yes.
Assign Supervisor Password — Establishes password protection for entering the
!
BIOS Setup utility, booting the system, and resuming from suspend.
Assign User Password — Establishes a user password once a supervisor password
!
is set. The user password allows the system to boot and resume from Suspend and
Save-to-File.
Boot Password Required — Indicates whether or not a password is required to boot
!
the system.
Resume Password required — Indicates whether or not a password is required to
!
resume the system. Boot Password must be defined to activate this parameter.
Assign HDD Password — Allows you to assign a password to allow or restrict
!
access to the hard disk drive contents.
Internal HDD Password — Enables or disables the HDD password.
!
3-8 Using the BIOS Setup Utility
System Security Setup
Default Setting
Press Enter
Press Enter
1
No
No
2
Press Enter
Disabled
Alternate Setting(s)
Yes
Yes
Enabled
.