Pausing The Screen - NEC VERSA LXI - VERSION 02-2000 Manual

Introducing BIOS Setup
Your NEC Versa LXi computer comes with a hardware program called BIOS Setup
that allows you to view and set system parameters. BIOS Setup also allows you to set
password features that protect your system from unauthorized use.
Use BIOS Setup to:
set the current time and date
!
customize your operating system to reflect your computer hardware
!
secure your system with a password
!
balance your performance needs with power conservation.
!
Entering BIOS Setup
Access the BIOS utility at power-on. Just press
When you press
(POST) and displays the current CMOS RAM settings.
If the system detects an error during POST, it prompts you with a double beep and a
message: "Press <F1> to resume." If you press
automatically. If you want to fix the error, carefully read the error message that appears
above the prompt (taking notes if you want), and press
your CMOS battery becomes fully discharged.

Pausing the Screen

To pause the screen during POST to view the BIOS revision number and other POST
messages, press and hold the Insert key while using the Power button to power on the
system. The message "<Ins> pressed, Press
BIOS Setup.
Pause key during POST. Once paused, press any key to continue.
3-2 Using the BIOS Setup Utility
Press <F2> to enter Setup.
to enter BIOS Setup, the system interrupts the Power-On Self-Test
F2
o pause the screen without entering the BIOS setup, simply press the
T
when the following prompt appears.
F2
, the system enters BIOS Setup
F1
. You will see this message if
F2
F1 to run setup" appears. Press F1 to enter