Mini-PCI LAN/Modem
Use the following steps to remove the optional Mini-PCI LAN/modem from the system.
1.
Remove the keyboard and front cover from the system.
Partially lift the Mini-PCI LAN/modem up and away from the main board and disconnect it
2.
from connector P9.
Disconnect the cables from connectors P10 and P11 of the main board.
3.
4.
Pull the LAN/modem towards the front of the system to release it from the securing tabs.
CMOS Battery
Use the following procedure to remove the CMOS battery from the system.
1.
Remove the keyboard, front cover, PC card assembly, and Mini-PCI LAN/modem (if
present) from the system.
Disconnect the CMOS battery from connector P19 of the main board.
2.
3-14 Disassembly and Reassembly
Lifting the Mini-PCI LAN/modem