Removing The Speaker Set; Removing The Modem - NEC Versa S800 Disassembly Manual

4. Remove the only two screws left that hold the main board in place (Fig. 29: ).
5. Take the main board out of the casing and put it away.
Note: when extracting the main board from its location, take care not to damage the external connectors
that may be stuck in the casing openings.

Removing the Speaker Set

To remove the speaker set, first remove the main board (see
perform the following steps:
1. Remove the tape holding the speaker cables in position.
2. Click the speakers out of their location and remove them from the case.

Removing the Modem

To remove the modem, first remove the main board (see
perform the following steps:
1. Turn the main board face down.
Fig. 28: Disconnecting the speaker set connector
Fig. 29: Removing the main board
NEC Versa S800 Disassembly Manual
Removing the Main
Removing the Main Board), then
M2x7
Board), then
Page 17