ETC High End Systems Zeo User Manual page 29

Maintenance
CAUTION:
ATTENTION :
l'entretien.
To ensure that the fixture remains in good working condition and does not fail prematurely,
ETC recommends that you perform regular maintenance on the fixture.
Keep the following in mind during regular service and inspection:
• All screws for installing the fixture or parts of the fixture must be tightly connected and
must not be corroded.
• There must not be any deformations to the housing, lenses, rigging, and installation
points (ceiling, suspension, trussing).
• Moving parts must not show any signs of wear and must move smoothly without issue.
• The power supply cables must not show any damage, material fatigue, or sediment.
• If spare parts are required, order only genuine parts from ETC or your authorized ETC
dealer.
Clean the Fixture
CAUTION:
and ammonia-based glass cleaners may permanently damage the lens and
reflectors.
Required tool and supplies (if cleaning the lens):
• 3 mm hex key
• Microfiber optical cloth or other non-abrasive cloth
• Purified water or ammonia-free glass cleaner
1. Clean the fans regularly to ensure maximum airflow and efficient cooling. This will
ensure that the light source operates in the best possible condition.
Note:
cleaning them. Letting the fans spin while using compressed air could damage the
fans.
Maintenance
RISK OF ELECTRIC SHOCK! Disconnect power before servicing.
RISQUE DE CHOC ÉLECTRIQUE! Couper l'alimentation avant
The use of paper toweling or other abrasive, high-friction wipes
If you use compressed air to clean the fans, hold the fan blades in place while
25