If the system detects an error during POST, it prompts you with a double beep and a message:
"Press <F1> to resume." If you press
want to fix the error, carefully read the error message that appears above the prompt (taking
notes if you want), and press
discharged.
Pausing the Screen
To pause the screen during POST to view the BIOS revision number and other POST messages,
press and hold the Insert key while using the Power button to power on the system.
BIOS Setup Main Menu
After you press
following.
Use the up and down arrow keys (located on the lower right corner of the keyboard) to toggle
through the BIOS Setup menu items.
2-10 System Configuration and Setup
, the system enters BIOS Setup automatically. If you
F1
F2
. You will see this message if your CMOS battery becomes fully
, the system displays the BIOS Setup Main Menu screen, similar to the
F2
BIOS Setup Main Menu