Power Source Specifications; Vibration Specifications; Shock Specifications; Power Specifications - NEC Versa 2500 Series Service Manual

2-22 General Specifications

POWER SOURCE SPECIFICATIONS

The following table lists system power specifications.
Input
AC Voltage
AC Frequency

VIBRATION SPECIFICATIONS

The following table lists vibration specifications.
ITEM
Operating Mode
Non-Operating

SHOCK SPECIFICATIONS

The following table lists system shock specifications.
ITEM
Operating Mode
Non-Operating Mode
Table 2-24 Power Specifications
Nominal
100 ~ 250 V
50 / 60 Hz
Table 2-25 Vibration Specifications
MODE
Direction of Movement: X, Y, Z Axis
Vibration Level: 5 ~ 500 ~ 5 Hz, 0.5 Gs Acceleration
Duration Time: 60 min. for each axis
Direction of Movement: X, Y, Z Axis
Vibration Level: 5 ~ 500 ~ 5 Hz 2 Gs Acceleration
Duration Time: 60 min. for each axis
Table 2-26 Shock Specifications
MODE
Impact Accelerator: 1g/10g Based on Half Sine-Wave Shock
Pulses of 11 Msec
Number of Shock: 3 Shocks for each of the 6 faces
Direction of movement: 6 Faces
Impact Accelerator: 10g, 20g, 30g, 40g, 50g Based on Half Sine-
Wave Shock Pulses of 11Msec
Number of Shock: 3 Shocks for each of the 6 faces
Direction of Movement: 6 Faces
Version
90 ~ 265 V
47 ~ 63 Hz