Versaglide - NEC Versa 2500 Series Service Manual

1-6 Introduction
Table 1-3 Fn Key Combination Summary (cont'd)
Key Combination
Fn key + F11 key
Fn key + right key
Fn key + left key
Fn key + Up key
Fn key + Down key
Fn key + PgUp key
Fn key + PgDn key
The notebook's keyboard also features an embedded editing keypad, which offers an op-
tional method for editing and moving within documents. The embedded editing keys are
color coded in blue and embedded on the front side of the embedded numeric keypads. To
use these editing keys, first press the Num Lock key and then combine the Shift key + the
desired function key to enable these editing keys. When the embedded editing keys are op-
erational, the Num Lock LED will be activated. To return to normal keyboard operation,
press the Num Lock key again. When the Num Lock LED glows the embedded numeric
key pads are activated.

VersaGlide

In front of the keyboard panel, in the center of the palm rest typing surface, is the Versa-
Glide pointing device. The buttons below the glide pad are configured (by default) as the
left and right button respectively. While the button to the right is configured as the right
button on the mouse. Moving the pointer on the screen is done by moving your finger over
the surface and directing the pointer where you want it to go.
Function
This key combination toggles the LCD display backlighting (CCFT)
on and off.
This key combination increases the contrast level.
This key combination decrease the contrast level.
This key combination increase the brightness incrementally for the
LCD.
This key combination decreases the brightness incrementally for
the LCD.
This key combination increases the speaker volume level incre-
mentally.
This key combination decreases the speaker volume level incre-
mentally.
Figure 1-4 VersaGlide