Hardware Reset Switch; The Rear Of The Notebook; External Keyboard And Ps/2 Mouse Port; Connecting The Ac Adapter To The Notebook - NEC Versa 2500 Series Service Manual

1-10 Introduction
Figure 1-9 Connecting the AC Adapter to the Notebook

Hardware Reset Switch

To the right of the AC adapter connector jack, you will notice a small hole which allows an
easy alternative to resetting the notebook's hardware.

The Rear of the Notebook

The following details the rear side of the NEC Versa 2500 Series computer.
Sound Jacks
Serial Port
Parallel Port

External Keyboard and PS/2 Mouse Port

The external keyboard and PS/2 mouse port allows you to connect an external full-sized
IBM AT-enhanced keyboard. When an external keyboard is connected, both the built-in
keyboard of the notebook and the external keyboard can be used simultaneously.
The NEC Versa 2500 Series also provides a Y-connector adapter allowing simultaneous
use of an external AT-enhanced keyboard and a PS/2 mouse. When using DOS or Windows
for Workgroups, if a external serial mouse is installed the VersaGlide is not supported.
IR Port
Figure 1-10 The Rear Side of the Notebook
Expansion Port
VGA Port
Ext. K/B and
PS/2 Mouse
Port