System Bios Setup Program; The Boot Setup Menu - NEC Versa 2500 Series Service Manual

Hide thumbs Also See for Versa 2500 Series:

Table of Contents

1-14

Introduction

SYSTEM BIOS SETUP PROGRAM

This section provides the outline features and operation of the Phoenix BIOS Setup pro-

gram used in the NEC Versa 2500 Series. The BIOS (Basic Input-Output System) Setup

program allows you to change the system configuration settings such as the current date

and time, the disk drive and ports settings, and the power management as well.

As POST (Power-On Self Test) executes during boot up process, the screen will display the

following message:

Press F2 to Enter SETUP

Press the

key to run the BIOS Setup program. The BIOS Setup program is organized

into two pages of menus. Change settings using the PgDn and PgUp keys. To move from

one option to another, you use the up and down arrow keys while using the spacebar and -

keys to change the settings.

To exit the BIOS Setup program, simply press the

Esc

key and select from the listed

choices window whether you want to load the default values for all fields; save your

changes and exit; or exit without saving any changes.

The boot setup menu allows you to change the following configurations:

Figure 1-16 The Bootup Setting Menu

Table of Contents