Table of Contents
Advertisement
16-MB memory card
Use the following steps to install a memory card.
Make sure the system power is off.
1.
Turn the NEC Versa 2000 upside down.
2.
Remove the memory compartment cover from the system by releasing the
3.
small latch and lifting the cover off the system
4.
Install the memory card as follows.
Align the memory card connector with the connector in the system.
(The card fits in either slot.)
Insert the card connector by sliding it into the system connector. Press
the card to make sure it is securely seated.
Memory Compartment
Cover
Learning to Use the Hardware 2-7
Removing cover
Advertisement
Table of Contents
Need help?
Do you have a question about the VERSA 2000 and is the answer not in the manual?