Configuring The System For Nec Webtelligent; Configuring The System For Microsoft Internet Explorer; Changing Network Settings - NEC POWERMATE ES 5250 - RELEASE NOTES Release Note

Configuring the System for NEC WebTelligent

TCP/IP must be enabled before you can use NEC WebTelligent. See "Changing
Network Settings" in this document to enable TCP/IP. See "NEC WebTelligent"
in Chapter 4 of the PowerMate ES 5250 Series User's Guide for detailed
installation information.

Configuring the System for Microsoft Internet Explorer

TCP/IP must be enabled before you can use Microsoft Internet Explorer 4.01 or
higher. See the next section, "Changing Network Settings," to enable TCP/IP.
Install Internet Explorer version 4.01 or 5.0 from the NEC Application and
Driver CD.
Note:
systems with the Windows 98 operating system.

Changing Network Settings

All systems are configured with the NetBEUI and NWLink protocols enabled.
However, before you connect a system to your network you might need to:
T
enable a different network protocol
T
disable unneeded protocols for enhanced system performance
T
add or change network, domain, and gateway information.
The following procedure describes how to disable the NetBEUI and NWLink
protocols, enable TCP/IP, and provide network, domain, and gateway
information. (If a different protocol is enabled, the menu choices might differ
from those described in the procedure.)
For information about installing TCP/IP on a system with Windows NT 4.0, see
"Installing TCP/IP Protocol" in this document.
1. From the Windows desktop, click
and click
2. Double click the
3. Click the
protocols are loaded:
NetBEUI Protocol
NWLink IPXSPX-Compatible Transport
NWLink NetBIOS
4. Highlight
warning window appears asking for confirmation to continue.
5. Click
Yes
NetBIOS lines disappear from the Configuration display.
Internet Explorer 5.0 comes preinstalled on
Control Panel .
Network icon in the Control Panel window.
tab. In the Configuration display, the following
Configuration
NWLink IPXSPX-Compatible Transport
. The NWLink IPXSPX-Compatible Transport and NWLink
NEC PowerMate ES 5250 Series Release Notes 7
Start on the taskbar, point to
and click
Settings ,
Remove . A