Using The Belt Clip; Installing The Belt Clip - NEC DS1000/2000 User Manual

Installation

Using the Belt Clip

Using the Belt Clip

Installing the Belt Clip

To install the belt clip (Figure 11: Installing the Belt Clip):
■
With the open end of the clip facing away from the antenna, snap the belt clip onto the handset.
To remove the belt clip (Figure 12: Removing the Belt Clip):
■
Gently pry the belt clip prongs out of the slots in the handset.
12 ◆ Chapter 1: Installation
Snap prongs into slots
Figure 11: Installing the Belt Clip
Pry prongs up from slots
Figure 12: Removing the Belt Clip
Snap prongs into slots
on other side
DS1000/2000 Cordless Telephone User Guide