Download
Share
Print this page
Yealink AX83H Deployment Manual
  1. Manuals
  2. Brands
  3. Yealink Manuals
  4. Cordless Telephone
  5. AX83H
  6. Deployment manual
Yealink AX83H Deployment Manual

Yealink AX83H Deployment Manual

Hide thumbs Also See for AX83H:
1
2
3
4
5
6

Advertisement

Quick Links

Download this manual
Batch Deployment Guide
Batch Deployment Guide
Introduction
Introduction
Step 1/2: Connecting to Wi-Fi Network
Step 1/2: Connecting to Wi-Fi Network
Introduction
Introduction
Before proceeding with batch deployment, you must configure the Wi-Fi network on one handset (Handset A).
Scenario 1: Handset A is brand new or restored to factory settings
Scenario 1: Handset A is brand new or restored to factory settings
1. Select the language.
2. Connect the Wi-Fi. Select Quick Wi-Fi Connect
3. Scan the QR Code displayed on Handset A from the mobile phone.
3.1. Use a mobile phone (Android/IOS phone) to scan the Quick Wi-Fi Connect QR code, and the mobile phone
browser will pop up the Wi-Fi network configuration page.
3.2 Configure the Wi-Fi name and password on the mobile phone, and then tap Confirm
Quick Wi-Fi Connect, and press the OK
OK Button.
1
Batch Deployment Guide
Confirm.

Advertisement

loading
Need help?

Need help?

Do you have a question about the AX83H and is the answer not in the manual?

Questions and answers

Related Manuals for Yealink AX83H

Summary of Contents for Yealink AX83H

  • Page 1 Batch Deployment Guide Batch Deployment Guide Batch Deployment Guide Introduction Introduction Step 1/2: Connecting to Wi-Fi Network Step 1/2: Connecting to Wi-Fi Network Introduction Introduction Before proceeding with batch deployment, you must configure the Wi-Fi network on one handset (Handset A). Scenario 1: Handset A is brand new or restored to factory settings Scenario 1: Handset A is brand new or restored to factory settings 1.
  • Page 2 Batch Deployment Guide  NOTE NOTE The default encryption method is WPA/WPA2-PSK WPA/WPA2-PSK, and the optional value is WPA3-Personal WPA3-Personal 3.3 If the connection fails, press Reconnect Reconnect on Handset A and try again.  TIP Connection Failed Reason: 1. WiFi authentication error: The entered Wi-Fi password is incorrect, and the connection will fail. Please ensure that the password you entered is correct and is case-sensitive.
  • Page 3 Batch Deployment Guide 4. Set the time zone. 5. On the Handset A, press the OK OK key > Wi-Fi Wi-Fi to check the Wi-Fi status. Scenario 2: Change to a new environment Scenario 2: Change to a new environment 1.
  • Page 4 Batch Deployment Guide Manual connection: The AX83H supports dual-band 802.11a/b/g/n WiFi, please refer to the following steps: a. On the Handset A, press the OK OK key > Wi-Fi Wi-Fi, and set Wi-Fi to On b. Press Available Networks Available Networks and a list of Wi-Fi networks will be displayed.
  • Page 5 Batch Deployment Guide handsets quickly. Procedure Procedure 1. On the Handset A, press the OK OK key > Wi-Fi Wi-Fi > Batch Deployment Batch Deployment. 2. Set the Hotspot Hotspot to On The default Hotspot SSID is Axseies_deploy Axseies_deploy, and the Hotspot Password is AXseries@8! AXseries@8! 3.
  • Page 6 Batch Deployment Guide 4. The Wi-Fi configurations of Handset A are being synchronized in batch to other handsets. Other handsets: They will automatically connect to the preset hotspot and also support manual hotspot Other handsets connection. Handset A: It automatically synchronizes its own Wi-Fi configuration information to the AX series handsets Handset A that are connected to the deployed hotspot.
Save PDF