Configuring Mld Filtering; Figure 55: Configuring Vlan Settings For Mld Snooping And Query - SMC Networks SMCGS10P-SMART Management Manual

◆
W
To configure VLAN settings for MLD snooping and query:
1.
2.
3.

Figure 55: Configuring VLAN Settings for MLD Snooping and Query

Use the MLD Snooping Port Group Filtering Configuration page to filter
C MLD
ONFIGURING
specific multicast traffic. In certain switch applications, the administrator
F
ILTERING
may want to control the multicast services that are available to end users;
for example, an IP/TV service based on a specific subscription plan. The
MLD filtering feature fulfills this requirement by denying access to specified
multicast services on a switch port.
P
ATH
Configuration, IPMC, MLD Snooping, Port Group Filtering
P
ARAMETERS
These parameters are displayed:
◆
◆
W
To configure MLD Snooping Port Group Filtering:
1.
This attribute will take effect only if MLD snooping proxy reporting is
enabled (see page 140).
URI - The Unsolicited Report Interval specifies how often the upstream
interface should transmit unsolicited MLD reports when report
suppression/proxy reporting is enabled. (Range: 0-31744 seconds,
Default: 1 second)
I
EB NTERFACE
Click Configuration, IPMC, MLD Snooping, VLAN Configuration.
Adjust the MLD settings as required.
Click Save.
Port – Port identifier.
Filtering Groups – Multicast groups that are denied on a port. When
filter groups are defined, MLD listener reports received on a port are
checked against the these groups. If a requested multicast group is
denied, the MLD report is dropped.
I
EB NTERFACE
Click Configuration, IPMC, MLD Snooping, Port Group Filtering.
– 145 –
| Configuring the Switch
C 4
HAPTER
MLD Snooping