Anti-Tip Bracket Installation - Summit DREAMBILT ALWC532PNR User Manual

Two-zone wine cellar

Hide thumbs Also See for DREAMBILT ALWC532PNR:

Models: SWC532BLBISTPNR, DBWC24133

Anti-Tip Bracket Installation

To reduce the risk of tipping the appliance by

abnormal usage or improper loading, the

appliance must be secured by properly installing

the anti-tip bracket packed with the appliance.

1. Place the anti-tip bracket on the floor as

shown in the figure to the right.

2. Mark the locations of the 8 holes of the anti-

tip bracket on the floor.

3. Use an 11/50" masonry drill bit and

insert plastic anchors.

4. Secure the anti-tip bracket to the floor, using

screws.

5. Slide the appliance into position, and make

sure the leg engages the anti-tip bracket.

The measurements for the anti-tip bracket installation are illustrated below:

NOTE: If the appliance is relocated, the bracket must be removed and installed in the new location.

Table of Contents

Do you have a question about the DREAMBILT ALWC532PNR and is the answer not in the manual?