Summit SWCD40 Instruction Manual

Summit SWCD40 Instruction Manual

2-drawer 40-bottle wine cellar

Advertisement

2-DRAWER 40-BOTTLE WINE CELLAR
Model SWCD40
Instruction Manual
Please read carefully and follow all safety rules and operating instructions.
FELIX STORCH, INC.
Write the Serial Number for your unit here:
Summit Appliance Division
770 Garrison Avenue
_________________________________
Bronx, New York 10474
www.summitappliance.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SWCD40 and is the answer not in the manual?

Questions and answers

Summary of Contents for Summit SWCD40

  • Page 1 2-DRAWER 40-BOTTLE WINE CELLAR Model SWCD40 Instruction Manual Please read carefully and follow all safety rules and operating instructions. FELIX STORCH, INC. Write the Serial Number for your unit here: Summit Appliance Division 770 Garrison Avenue _________________________________ Bronx, New York 10474...
  • Page 2: Important Safeguards

    IMPORTANT SAFEGUARDS Your safety and the safety of others are very important. We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages. This is the Safety Alert Symbol. The symbol alerts you to potential hazards that can kill or injure you and others.
  • Page 3 FOLLOW WARNING CALLOUTS BELOW ONLY WHEN APPLICABLE TO YOUR MODEL • Use two or more people to move and install appliance. Failure to do so can result in back or other injury. • To ensure proper ventilation for your appliance, the front of the unit must be completely unobstructed. Choose a well-ventilated area with temperatures above 60°F (16°C) and below 90°F (32°C).
  • Page 4: Table Of Contents

    Table of Contents Important Safeguards ............... 2 - 3 Location of Parts ..................5 Technical Data ..................6 Installation Instructions .................6 Operating Your Wine Cellar ............. 7 - 8 The Control Panel ................7 The Display Screen ..............7 - 8 Care and Maintenance ................8 Cleaning Your Wine Cellar Moving Your Wine Cellar Important Precautions...
  • Page 5: Location Of Parts

    Location of Parts 1. Upper drawer handle 13. Foot 14. Upper zone temperature probe 2. Upper drawer 15. Upper zone fan 3. C/F switch 4. Upper zone temperature control 16. Upper zone slide shelf 17. Exhaust window 5. Temperature display 6.
  • Page 6: Technical Data

    23.4" x 22.4" x 33.1" Installation Instructions Your SWCD40 wine cellar may be installed either built-in or free-standing, but it is important that the front of the unit be kept clear of obstructions, especially the vents at the bottom. If it is built in, you should provide the following clearances to ensure the best operation and proper ventilation: 3/16”...
  • Page 7: Operating Your Wine Cellar

    Operating Your Wine Cellar NOTE: Allow unit temperature to stabilize for 24 hours before use. The Control Panel: • To control the upper zone temperature, press the UP and DOWN buttons on the left side where you see the words Upper Zone (Zone I). Each press will adjust the temperature by 1°C between 5°...
  • Page 8: Care And Maintenance

    : Heating. 3. Setting temperature of lower zone 4. Celsius or Fahrenheit degree 5. The actual temperature of the lower zone 6. Celsius or Fahrenheit degree 7. Lower Zone 8. Celsius or Fahrenheit degree 9. Upper Zone 10. The actual temperature of the upper zone 11.
  • Page 9: Electrical Circuit Diagram

    Electrical Circuit Diagram SENSOR 1 SENSOR 3 SENSOR 2 - 9 -...
  • Page 10: Troubleshooting

    There is a problem with the plug. LED display error Actual temperature is out of range. Buttons are not functional. Temperature controller panel is damaged. If you still have a problem with your wine cellar, call our SUMMIT Service Center toll-free at 1-800-932-4267. - 10 -...
  • Page 11 Notes - 11 -...
  • Page 12: Limited Warranty

    Limited Warranty ONE-YEAR LIMITED WARRANTY Within the 48 contiguous United States, for one year from the date of purchase, when this appliance is operated and maintained according to instructions attached to or furnished with the product, warrantor will pay for factory-specified parts and repair labor to correct defects in materials or workmanship.

Table of Contents