iWeld GORILLA POCKETMIG 205 SYNERGIC SILVERBACK User Manual
Igbt inverter type three function (mig/mma/lift tig) welding power source
Hide thumbs
Also See for GORILLA POCKETMIG 205 SYNERGIC SILVERBACK:
- User manual (46 pages) ,
- User manual (54 pages)
Related Manuals for iWeld GORILLA POCKETMIG 205 SYNERGIC SILVERBACK
Summary of Contents for iWeld GORILLA POCKETMIG 205 SYNERGIC SILVERBACK
- Page 1 CUTTING EDGE WELDING USER’S MANUAL IGBT Inverter type Three Function (MIG/MMA/Lift TIG) Welding Power Source GORILLA POCKETMIG 205 SYNERGIC SILVERBACK GORILLA POCKETMIG 235 SYNERGIC SILVERBACK GORILLA POCKETMIG 205 ALUPULSE SILVERBACK...
- Page 2 Introduction First of all, thank you for choosing an IWELD welding or cutting machine! Our mission is to support your work with the most up-to-date and reliable tools both for DIY and industrial application. We develop and manufacture our tools and machines in this spirit.
- Page 3 WARNING! Welding is a dangerous process! The operator and other persons in the working area must follow the safety instructions and are obliged to wear proper Personal Protection Items. Always follow the local safety regulations! Please read and understand this instruction manual carefully before the installation and operation! •...
- Page 4 The Main Parameters POCKETMIG 205 POCKETMIG 205 POCKETMIG 235 GORILLA SYNERGIC SILVERBACK ALUPULSE SILVERBACK SYNERGIC SILVERBACK Art. Nr. 80POCMIG205CBS 80POCMIG205ALUP 80POCMIG235SYN IGBT IGBT IGBT Inverter type OLED OLED OLED Digital display Synergic Control MIG PULSE ...
- Page 5 2. Installation and Operation 2-1. Control Panel Descriptions Welding process choose MIG SYNERGIC mode MIG mode Lift-TIG mode MMA mode Gas suggestion Welding material type Welding material choose Function Current/wire feeding speed display Wire diameter choose MIG wire diameter type Current adjustment/inching 2T/4T Function Post Gas Function Voltage adjustment/gas checking Pre Gas Function Function menu...
- Page 6 2-2. Connection of the power wires 1. Each machine is equipped with primary power wire, according to the input voltage, please connect the primary wire to the suitable voltage class. 2. The primary wire should be connected to the corresponding socket to avoid oxidization. 3. Use multimeter to see whether the voltage value varies in the given range. 4.
- Page 7 2.4.1 MIG Installation method 1. Plug the welding torch into the output socket “ ” on the front panel, and tighten it. Thread the wire into the torch manually. 2. When welding the solid wire, Insert the earth cable plug into the negative socket “-” on the front panel, and tighten it clockwise.
- Page 8 Settings in manual MIG mode Gas Type: - MIG/MAG welding Ar 80%+CO 20% mixed gas No Gas - FCAW welding - only for Flux Cored Welding Wire CuSi - 100% Argon shielding gas and continuous, solid, copper wire for the GMA joining of copper-zinc alloys and low-alloyed copper and for the GMA brazing of zinc-coated steel sheets.
- Page 9 Settings in synergic MIG mode Gas Type: - MIG/MAG welding Ar 80%+CO Wire diameter Ø=0.6 - 1.2 mm IND (inductance) -10 - 0 - +10 2T/4T 2T or 4T Hot Start 0 - +10 Burn Back Time 0 - +10 Welding voltage fine adjust: Arc Lenght -10 - 0 - +10...
- Page 10 Settings in MMA mode Arc Force 0-10 Hot Start 0-10 VRD (Voltage reduction) off/on Anti Stick off/on Welding current MMA: 20A-160A Settings in Lift TIG mode Welding current TIG: 10A-160A 2.5 Recommended welding parameters Diameter Recommended welding current Recommended welding voltage (mm) Wire Ø 0.8 50~150 20.8~22.4 Wire Ø...
-
Page 11: Maintenance
Precautions Workspace 1. Welding equipment free of dust, corrosive gas, non-fl ammable materials, up to 90% humidity for use! 2. Avoid welding outdoors unless protected from direct sunlight, rain, snow, work area tempera- ture must be between -10 °C and +40°C. 3.
Need help?
Do you have a question about the GORILLA POCKETMIG 205 SYNERGIC SILVERBACK and is the answer not in the manual?
Questions and answers