Flash/File Commands; Bootfile - SMC Networks 2552W-G2 User Manual

6
Command Line Interface

Flash/File Commands

These commands are used to manage the system code or configuration files.
Command

bootfile

copy
delete
dir
show bootfile
bootfile
This command specifies the image used to start up the system.
Syntax
bootfile <filename>
filename - Name of the image file.
Default Setting
None
Command Mode
Exec
Command Usage
• The file name should not contain slashes (\ or /), the leading letter of the file
name should not be a period (.), and the maximum length for file names is
32 characters. (Valid characters: A-Z, a-z, 0-9, ".", "-", "_")
• If the file contains an error, it cannot be set as the default file.
Example
Enterprise AP#bootfile -img.bin
Enterprise AP#
6-54
Table 6-10. Flash/File Commands
Function
Specifies the file or image used to start up the system
Copies a code image or configuration between flash
memory and a FTP/TFTP server
Deletes a file or code image
Displays a list of files in flash memory
Displays the name of the current operation code file that
booted the system
Mode Page
GC 6-54
Exec 6-55
Exec 6-56
Exec 6-57
Exec 6-57