SMC Networks 2552W-G2 User Manual page 90

5
System Configuration
CLI Commands for Configuring SNMPv3 Users – Use the snmp-server engine-id
command to define the SNMP v3 engine before assigning users to groups. Use the
snmp-server user command to assign users to one of the three groups and set the
appropriate authentication and encryption types to be used. To view the current
SNMP v3 engine ID, use the show snmp command. To view SNMP users and
group settings, use the show snmp users or show snmp group-assignments
commands.
Enterprise AP(config)#snmp-server engine-id 1a:2b:3c:4d:00:ff
6-45
Enterprise AP(config)#snmp-server user
User Name<1-32> :chris
Group Name<1-32> :RWPriv
Authtype(md5,<cr>none):md5
Passphrase<8-32>:a good secret
Privacy(des,<cr>none) :des
Passphrase<8-32>:a very good secret
Enterprise AP(config)#exit
Enterprise AP#show snmp users
=============================================
UserName
GroupName
AuthType
Passphrase:****************
PrivType
Passphrase:****************
=============================================
Enterprise AP#show snmp group-assignments
GroupName
UserName
Enterprise AP#
5-44
:chris
:RWPriv
:MD5
:DES
:RWPriv
:chris
6-45
6-50
6-50