Show Version; Show Config - SMC Networks 2552W-G2 User Manual

show version

This command displays the software version for the system.
Command Mode
Exec
Example
Enterprise AP#show version
Version Information
=========================================
Software Version
Date : Feb 8 2006, 17:48:27
BootRom Version
Hardware version
=========================================
Enterprise AP#

show config

This command displays detailed configuration information for the system.
Command Mode
Exec
Example
Enterprise AP#show config
Authentication Information
===========================================================
MAC Authentication Server
MAC Auth Session Timeout Value : 0 min
802.1x supplicant
802.1x supplicant user
802.1x supplicant password
Address Filtering
System Default : ALLOW addresses not found in filter table.
Filter Table
-----------------------------------------------------------
No Filter Entries.
Bootfile Information
===================================
Bootfile : smc-img.bin
===================================
Protocol Filter Information
===========================================================
Local Bridge
AP Management
Ethernet Type Filter :DISABLED
Enabled Protocol Filters
-----------------------------------------------------------
No protocol filters are enabled
===========================================================
: v5.0.0.0
: v1.1.1
: R0A
: DISABLED
: DISABLED
: EMPTY
: EMPTY
: ALLOWED
:DISABLED
:ENABLED
System Management Commands
6
6-23