Show Snmp - SMC Networks 2552W-G2 User Manual

show snmp

This command displays the SNMP configuration settings.
Command Mode
Exec
Example
Enterprise AP#show snmp
SNMP Information
==============================================
Service State
Community (ro)
Community (rw)
Location
Contact
EngineId :80:00:07:e5:80:00:00:27:04:00:00:00:08
EngineBoots:3
Trap Destinations:
1: 0.0.0.0, Community: *****, State: Disabled
2: 0.0.0.0, Community: *****, State: Disabled
3: 0.0.0.0, Community: *****, State: Disabled
4: 0.0.0.0, Community: *****, State: Disabled
radiusServerChanged
sntpServerFail
dot11StationReAssociation
dot11StationRequestFail
dot1XMacAddrAuthFail
dot1XAuthSuccess
localMacAddrAuthSuccess
iappStationRoamedFrom
iappContextDataSent
wirelessExternalAntenna
dot11InterfaceGFail
=============================================
Enterprise AP#
: Disable
: ********
: ********
: R&D 2
: David
systemUp Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
systemDown
configFileVersionChanged
dot11StationAssociation
dot11StationAuthentication
dot1XMacAddrAuthSuccess
dot1XAuthNotInitiated
dot1XAuthFail
localMacAddrAuthFail
iappStationRoamedTo
dot1XSuppAuthenticated
dot11InterfaceAFail
6
SNMP Commands
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
6-53