Bridge Dynamic-Entry Age-Time; Show Bridge Aging-Time - SMC Networks 2552W-G2 User Manual

bridge dynamic-entry age-time

This command sets the time for aging out dynamic entries in the WDS forwarding
table.
Syntax
bridge dynamic-entry age-time <seconds>
seconds - The time to age out an address entry. (Range: 10-10000
seconds).
Default Setting
300 seconds
Command Mode
Global Configuration
Command Usage
If the MAC address of an entry in the address table is not seen on the
associated interface for longer than the aging time, the entry is discarded.
Example
Enterprise AP(config)#bridge dynamic-entry age-time 100
Enterprise AP(config)#

show bridge aging-time

This command displays the current WDS forwarding table aging time setting.
Command Mode
Exec
Example
Enterprise AP#show bridge aging-time
Aging time: 300
Enterprise AP#
WDS Bridge Commands
6
6-79