SMC Networks 2552W-G2 User Manual page 88

5
System Configuration
To view the current SNMP settings, use the show snmp command.
Enterprise AP#show snmp
SNMP Information
==============================================
Service State
Community (ro)
Community (rw)
Location
Contact
EngineId
EngineBoots:1
Trap Destinations:
1:
2:
3:
4:
dot11InterfaceAGFail
dot11StationAssociation
Enabled
dot11StationReAssociation
Enabled
dot1xAuthFail
dot1xAuthSuccess
dot1xMacAddrAuthSuccess
Enabled
iappStationRoamedFrom
Enabled
localMacAddrAuthFail
Enabled
iappContextDataSent
Enabled
wirelessExternalAntenna Enabled
Enabled
dot11InterfaceGFail Enabled
pppLogonFail
configFileVersionChanged
Enabled
systemDown
=============================================
Enterprise AP#
5-42
:80:00:07:e5:80:00:00:2e:62:00:00:00:18
192.168.1.9, Community: *****, State: Enabled
0.0.0.0, Community: *****, State: Disabled
0.0.0.0, Community: *****, State: Disabled
0.0.0.0, Community: *****, State: Disabled
Enabled dot11InterfaceBFail
Enabled dot11StationAuthentication
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
: Enable
: *****
: *****
: WC-19
: Paul
Enabled dot11StationRequestFail
dot1xAuthNotInitiated
dot1xMacAddrAuthFail
iappContextDataSent
iappStationRoamedTo
localMacAddrAuthSuccess
Enabled dot1XSuppAuthenticated
sntpServerFail
Enabled
systemUp
6-53
Enabled
Enabled
dot11InterfaceAFail
Enabled
radiusServerChanged
Enabled
Enabled