Advertisement
Quick Links
KES100 Electric Strike
Installation Instructions
Specifications
Installation Instructions
1
Measure the vertical and horizontal
position of the latch bolt on the door leaf.
4
Drill the holes and cut the door frame out
as indicated by the template.
Top View
Ensure a minimum 1mm gap between the latch and the
front face of the release plate to avoid pre-load on strike.
2
Mark the position of the latch bolt on the
door frame as shown in figure.
5
Fix the fixing plugs tightly.
3
Align the installation template to the
marked line.
6
Connect to the power and test the
electric strike before mounting the unit.
Optional Brackets
Lip extension brackets for wide jamb.
KESLP150
KESLP125
50mm
25mm
T: 1800 675 411
www.dormakaba.com.au
Advertisement
Related Manuals for Dormakaba KES100
Summary of Contents for Dormakaba KES100
- Page 1 KES100 Electric Strike Installation Instructions Specifications Installation Instructions Measure the vertical and horizontal Mark the position of the latch bolt on the Align the installation template to the position of the latch bolt on the door leaf. door frame as shown in figure.
- Page 2 KES100 Electric Strike Installation Instructions Connecting Diagrams Dual Voltage (12V/24V) 12 VDC How to Change Version 24 VDC Control Mode (N.C./N.O. contacts, i.e. Readers) N.C. contact or access relay for “Fail-safe” setting. N.O. contact or access relay for “ Fail-secure” setting.
Need help?
Do you have a question about the KES100 and is the answer not in the manual?
Questions and answers