Download Print this page

Installation; Operating The Device Safely - HOMCOM 821-040V90 Instruction Manual

Advertisement

Available languages

Available languages

4. INSTALLATION

4.1 LOCATION
1. Place the unit on a firm, level surface in an area with at least 30cm of free space around
it to allow for proper air circulation.
2. Never install the unit where it could be subject to :
● Heat sources such as radiators, heat registers, stoves or other products that products
that produce heat.
● In an area where oil or water may be splashed
● Direct sunlight
● Mechanical vibration or shock
● Excessive dust
● Lack of ventilation, such as cabinet or bookcase
● Uneven surface
WARNING
Install the unit in rooms which exceed 4 m².
Do not install the unit in a place where inflammable gas may leak.
NOTE
The manufacture may provide other suitable example or may provide additional
information about the refrigerant odour.

4.2 OPERATING THE DEVICE SAFELY

● Check the device after unpacking for any damages or scratches on it.
● Operate this unit in an ambient temperature from 5°C to 35°C.
● Do not use in the outdoors. This dehumidifier is intended for indoor residential
applications only.
● Do not operate in close proximity to walls, curtains, or other objects that may block inlet
and outlet.
● Keep the air inlet and outlet free of obstacles.
● Adjusting the wind deflector in the upward direction prior to start up.
● If tipped more than 45°, allow the unit to set upright for at least 24 hours before start up.
● Keep doors and windows close for better energy saving.
8

Advertisement

loading
Need help?

Need help?

Do you have a question about the 821-040V90 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel